Creativity / Continuity / Quality

UHM CNC Horizontal Machining Center Inquiry

> UHM Belt Spindle

UHM Belt Spindle UHM Belt Spindle UHM Belt Spindle
  • Features:

    • A highly rigid, high precision machining center with oversized base and the column fixed on the base.
    • Applicable for general medium and sized parts machining and box shaped parts boring.
    • Cross slide design. The table is fully supported in the entire travel to maintain eifetime accuracy.
    • Table load is 65% more than competitive models in Taiwan.
    • Extra large travel provides the largest machining capacity in the industry.
  • MODEL UNIT      UHM-630 UHM-630A UHM-800 UHM-800A UHM-1250 UHM-1250A UHM-1512 UHM-2015
    TABLE Table Size mm 630x630X360D 630x630X360DAPC 800X800X360D 800X800X360DAPC 1250X1250X360D 1250X1250X360DAPC 1100x800 1500x800 LONG TABLE
    T-Slots mm 20X5 22X7 22X7 20X5
    Maximum Load kg 2000(2500) 4000 3000 5000 2500 4000
    Indexing Degree     1°/360(0.001°) 1°/360(0.001°)    
    TRAVEL X Axis mm 1500(1600) 2000 2000 1500(1600) 2000
    Y Axis mm 1200 1000 1500(1800) 1500 1500(1800) 1500 1200 1500(1800)
    Z Axis mm 1000(1100) 1000 1400(1600) 1400 1400 1000(1100) 1400
    SPINDLE Speed rpm 4000(6000) 4000(6000) 4000(6000) 4000(6000)
    Taper   7 / 24 taper ISO.50, BT-50
    DISTANCES Spindle Center to Table mm 0~1200 0~1000 0~1500(1800) 0~1500 0-1500(1800) 0-1500 40-1240 0-1500(1800)
    Spindle Nose to Table Center mm (175~1175)225~1225 225~1225 220~1620(1820) 220~1620 370-1770 225-1225 220-1620(1800)
    Height from ground to table surface mm 1110 1260 1325 1480 1350 1480 1075 1325
    FEED RATE Rapid Feed rate X/Y/Z  m/min 15/12/15 15/12/15 2015/12/15
    Minimum Setting mm 0.001 0.001 0.001
    Cutting Feed rate mm/min 1~5000 1-5000 1-5000
    MOTOR Spindle Servo Motor-cont./30min. kW 11/15(15/18.5) 15/18.5(22/26) 15/18.5(22/26) 11/15(15/18.5) 15/18.5(22/26)
    X/Y/Z/B Servo Motors kW 3/3/4/3 4/4/4/3 4/4/4/4 3/3/4 4/4/4
    Lubricator Motor kW 0.15 0.15 0.15
    Hydraulic Pump kW 2.25 2.25 2.25
    Coolant Pump kW 1.17 1.17 1.17
    Chip Conveyor kW 0.2 0.2 0.2
    Oil Cooler Pump kW 0.75 0.75 0.75
    ATC No. of Tools      pieces 40(60) 40(60) 40(60)
    Tool Selection   Absolute Absolute Absolute
    Tool Change Time sec. 15 15 15
    Max. Tool (Diameter/Length) mm Ø125/Ø250(Without Adjacent Tool)/Length400 Ø125/Ø250(Without Adjacent Tool)/Length400 Ø125/Ø250(Without Adjacent Tool)/Length400
    Max. Tool Weight kg 18 18 18
    MISCELLANEOUS Power Required kVA 30 45 45 30 45
    Pressurized Air kg/cm² 6 6 6
    APC change time sec.   45   90   120  
  • standard accessories:

    1. Linear scale on X,Y,Z axes
    2. Spindle oil cooler
    3. Automatic power off
    4. Hydraulic system
    5. Coolant system
    6. Lubricator system
    7. Alarm lamp
    8. Work lamp
    9. M.P.G.
    10. RS232 interface
    11. Heat exchanger
    12. Chip conveyor and cart
    13. Leveling bolts & pads
    14. Controller manuals and circuit diagram
    15. Operation manuals
    16. Machine inspection lists
    17. Splah guards (around the table)
    18. Toolbox
    19. FANUC 0i-MF
    20. ATC : 40 Tools

    optional accessories:

    1. ATC: 60 Tools
    2. Oil mist device
    3. Variety of controllers ( FANUC / MELDAS /SIEMENS / HEIDENHAIN)
    4. Various auxiliary work tables are available
    5. Air conditioner at cabinet
    6. Coolant through spindle
    7. Various work tables are available 700x700, 700x900mm (for UHM-630) 800x1000,1000x1000mm(for UHM-800)
    8. 0.001 indexing on B-axis
    9. Oil-feed holder
    10. Splash guard(Without Roof)
    11. Full splash guard(With Roof)
    12. UHM-630 Working Table(2500kg)

YoU maCHINE, you win!

U'chine always works hard to deliver machines with ever better performance, creating a new bench mark with every new model.

©2016 Copyright UCHINE All Rights Reserved.
Design by Taiwan Products, B2BChinaSources, B2BManufactures